Music Production

Mastering with Ozone 11 | 5 Basic Steps to Produce a Lush Sound

Calvin West | Mar 10, 2024

If you want to get the most out of your mix, try mastering with Ozone 11, or at least give mastering a little more attention than just sticking a limiter on your master bus and turning up the gain knob. If you decide to give mastering with Ozone 11 a shot, here are the 5 basic steps I go through for every master.

Even though my software of choice for digital mastering is iZotope Ozone 11, Ozone’s main “modules“, are actually universally available in any DAW, even the one you used for your production. In this post, I’m going to list the 5 modules that I use for every master.

A professionally designed lyric video is the perfect way to showcase your music and grab attention. Not only does it enhance the listening experience, but it also creates a powerful connection with your audience.

Ready to take your music to the next level?

In This Article

Ozone Equalizer

The first step in mastering is to clean up unwanted frequencies. This will often include a high pass filter at a very low frequency below the human hearing range. The equalizer in Ozone has a very neat trick where if you hold down the ALT key and move your mouse through the spectrum while the music is playing, it will isolate the bandwidth to the frequency you hover over. This is a great way to find problem frequencies that you’ll want to attenuate.

If you’re not using Ozone, you can emulate this trick by setting a really narrow Q-value to your band and sweeping it across the spectrum until you hear something unpleasant you want to cut. Remember to cut narrow, and if you have to boost, boost wide.

Ozone Imager

Once you’re happy with the overall sound signature, I recommend adding the Imager module for two purposes. Firstly, to clean up the low end by drastically reducing its width. To simplify, lower frequencies whose wavelength is larger than the distance between human ears lose directionality. So having a wide-sounding low end will most likely not have any contribution to your mix other than muddying up the sound.

The other thing you want to do with the Imager is turn up the width on your high end. It’s very subtle but it makes the entire mix sound wider and slightly more exciting.

Ozone Dynamics

You may recognize this module from your DAW as a multiband compressor. The idea here is to get a more smooth and balanced tone. The template I’ve saved as a starting point has a ratio of 2:1 on all four bands, and I aim for a 1 to 2 dB reduction for the loudest parts of the song. I like to go for a transparent master that’s sympathetic to the mix, but if you want to be a little more aggressive you can turn up the ratio to 3:1.

If a certain frequency range is lacking in the mix, you can give it a slight boost to it during this phase.

iZotope Vintage Tape

This one is optional, you can use it if you’re going for a warm analog-sounding master. What it does is essentially add a bit of saturation to the sound. If you want to emulate this in your own DAW, you can instead add a very subtle distortion and compression to your master bus.

Ozone Maximizer

This is where the magic happens, Ozone’s Maximizer module is essentially a glorified limiter plugin that’s designed to maximize the perceived loudness of your audio track while maintaining clarity and preventing distortion.

Unlike a traditional limiter, however, the main control knob is a threshold meter that you turn down, instead of a gain knob you turn up.

If you want to preserve the dynamic range of your mix, keep an eye on your gain reduction and try not to go over 1db to 3db of gain reduction for the loudest parts of the song.

I’d also recommend leaving the Ceiling parameter at -0.1 dB, just in case something slips passed and causes clipping. Though I’ve never had any such issues in years of usage myself.

Use a Reference Track

Another handy tool Ozone offers is reference function, where you can add your favorite sounding track, switch between them by the click of a button, while watching both of their frequency responses on the audio spectrum for a more visual comparison. But bear in mind as with everything in music, there’s no right or wrong answer. Feel free to challenge every rule once in a while and try something new, see how you feel about the resulting sounds then rinse and repeat.

Mastering with Ozone 11

Bear in mind as with everything in music, there’s no right or wrong answer. Feel free to challenge every rule once in a while and try something new. Take frequent breaks, come back and see how you feel about the resulting sounds then rinse and repeat. Once you’re done with the mastering, your track is ready for release. It’s time to think about promoting your music, consider a lyric video!

Promote Your Music with a Lyric Video

Mastering your track is just the first step toward making your music shine. To truly captivate your audience and stand out in a crowded music landscape, pair your polished sound with stunning visuals.

A custom lyric video produced by an artist can help you grab attention and turn casual listeners into loyal fans. Whether you’re promoting a single or launching a full album, the right visuals can elevate your music to new heights.

Ready to bring your music to life?